How Do You Light Construction Sites at Night?

It is important to make sure that you have the right construction lights installed at night. This is especially important if you are going to work at the construction site at night as well. There are a couple of things that you can do to ensure that you are lighting the site correctly. Then, you will not have any problems with workers that can’t see at the site and that can’t build correctly. Theseare a guide for you to consider:

Have a lighting plan

The first thing that you should have when you want to install construction lights, is to have a lighting plan. In this plan, you should make sure that you are going to have enough light throughout the construction site. You should also make sure that the lights that you are planning to install are strong enough to get to all the points on the construction site.

This can be a problem if you are just installing lights, without having a plan on where to install the lights to have enough light on the site.

Consider the type of lights that you want to install

There are a variety of lights that you can install for your Temporary Construction Lights. However, it is important to make sure that you are going to choose the best possible lights for your construction site. Some of the lights are expensive and uses a lot of power to work correctly.

Then, there are some of the lights that are really affordable and that will reduce the overall costs. If you are looking for affordable, but still have great lights, then you should consider making use of LED lights. This is the newest lights on the market and really a great option for sites. Click here.

Quality versus durability

What is going to be best for the construction site? Quality or durability? It can be a hard choice because this normally means that you are going to spend a lot of money on the right construction lights.

However, what if we can tell you that you can purchase some lights that are going to be quality and durable? This is something that you can consider. And, the best part is that these lights don’t cost as much as what you might have thought. The LED lights are high-quality lights that are durable, and that are going to last for a long time before it needs to be replaced.

Getting the right lights for a construction site can be difficult. Especially, if you don’t know what type of lights you should install. There are a couple of things that you need to consider so that you can know that you are purchasing and installing the right lights. With all these tips, you will know exactly what the LED lights are the right lights for any construction sites. And, with the right planning, you will know for sure that you are going to have the best possible temporarily construction lights that will assist you in working through the night. Click here for more information: http://www.larsonelectronics.com/

Lighting Regulations for Drawbridges over Navigable Waters in the US

Highly congested docks and waterways are filled with drawbridges that connect various land-based locations around the region. US lighting regulations under 33 CFR 118.1, requires such structures to be illuminated during operation.

This article dives into specific lighting guidelines for bridges over bodies of water where marine operations are conducted on a regular basis.

Types of Lights for Marine-based Bridges

The type of lighting systems applied to drawbridges depends on the classification of the structure. For single-opening drawbridges, every draw span of the structure must be illuminated with two lanterns.

When the bridge is closed, it showcases two red lights; and when open, the bridge displays two green luminaries. During installation, both types of bridge lamps should be mounted at least 15 feet from the roadway (above the bridge). Yellow lights are utilized when illuminating a floating swing bridge.

Signaling Drawbridge Operators with Lights

When a vessel approaches a commercial bridge, the boat operator is required to signal its presence to the drawtender (operator of the drawspan, which can be a trained crew member).

This action is emphasized using boat spotlights. Specifically, 33 CFR 117.15 indicates that a fixed or flashing light is suitable for signaling (white, amber or green). The lighting signal is designed to acknowledge the request from the boat operator and to verify that the bridge will be raised for the safe passage of the vessel.

When the bridge cannot be opened, due to obstructions or busy operations on land, the drawtender must also signal the boat. The lighting signal used for this type of action is a fixed or flashing light (red). Moreover, this signal should be deployed within 30 seconds after the visualization of the boat’s opening signal.

The same signaling protocol is used when the bridge is open and must be closed immediately due to an emergency.