LED Boat Strip Lights Chip Considerations and Applications

led strip light

LED boat strip lights offer increased safety and enhanced mood. They are capable of providing consistent illumination in areas with high activity. When installed outside of the vessel, the compact luminaries improve detection from nearby boats, greatly decreasing the chances of collision.

Purchasing LED boat strip lights for your vessel requires understanding its uses and configurations. Read on to learn about how these factors can affect illumination on your watercraft. To purchase waterproof strip lights, please visit – LarsonElectronics.com

LED Boat Strip Lights

LED Chip Size: 3528 and 5050

The first thing one must understand when choosing LED boat strip lights is chip size. These products are usually offered in 5050 or 3528 chip configurations. The values associated with the components refer to the size or dimensions of the chips in millimeters (mm). With this in mind, 5050 LEDs measure 5 mm x 5 mm, while 3528 LEDs measure 3.5 mm x 2.8 mm.

5050 LEDs are considered to be much stronger than 3528 LEDs. The luminaries house three diodes per single housing, resulting in brighter illumination. By comparison, 3528 LEDs only carry one diode per housing. Due to 5050 LED boat strip lights forcing more diodes on the board, heat can become an issue. Though when paired against outdated lighting technologies, LEDs run noticeably cooler.

Applications and Considerations

3528 LED boat lights are very useful for single color installations that require only one light color (for example, white). This is due to their single-diode configuration. To produce colors, LEDs need three diodes: red, green and blue (RGB). 5050 LED boat strip lights can accommodate this requirement, as they can hold multiple didoes. Other configurations and sizes include the following: 3020 LEDs, 3014 LEDs and 2835 LEDs. 2835 LEDs can be found inside airplanes and are the most compact from the set of examples. 3014 LEDs are typically installed in and around commercial buildings.

Going back to lighting systems for marine vessels and based on the information above, it would be possible to narrow down the exact type of LED boat strip light you need. Most boats use single-diode configurations for strip lighting to avoid mixing with navigation lights. Hence, it would make sense to use 3528 LEDs for exterior installations. However, to enhance the mood inside cabins on a boat, 5050 RGB LEDs may be used.

Lastly, LED strip lights for boats must be waterproof and corrosion resistant to prevent premature failure. Low voltage models that operate on 12V DC or 24V DC are useful for compliance with lighting regulations for marine applications.