Using LED Lights to Replace Halogens

Typically, small LED spotlights are used to provide a more focused lighting or accent lighting. In both of these ways, they are widely used domestically and commercially. By using longer lasting halogen lamps, may already have been saving money. Halogen bulbs, although they use a heated filament, are so much durable because their tungsten filaments are regenerated instead of being completely evaporated and deposited on the inside of the lamp.

Benefits of using LED Lights

LED luminescence is increasingly replacing the conventional lighting systems. That is happening because of the following advantages associated with LED spotlights:

  • Long-lasting; they operate for extended hours, and they don’t burn out or suddenly stops.
  • They are energy-efficient as about 80% of the electrical energy gets converted to luminescence while the rest is converted to give out heat
  • They are eco-friendly as the lights are free from toxic chemicals. They are recyclable and reduce the carbon content up to a third.
  • Zero UV emissions.
  • The lights can blow in the even small power supply because their consumption is low.

LED Spotlights- Why you should consider them for your spotlights

Because they are usually many of them in a small area and commonly installed in a place that is hard to reach, spotlights are not things that you would want to have to be replacing so often. LED spotlights can last up to 50 times longer than traditional incandescent bulbs, and each of the lamps is made up of a cluster of small light producing diodes that can produce a bright and clear light which can be a good replacement of their halogen counterparts. See more this site: http://www.walleyesfortomorrowwalworth.org/benefits-low-voltage-boat-lights/

They also can be used close to delicate items, for instance in a shop display lighting, ornaments and photos at home, within home accent lighting situations, without causing heat damage or fading over time because they do not rely on gas combinations or heated filaments to produce their electroluminescence.

GU10 LED Spotlights- Invest in Money Saving Performance over Time

The GU10 LED spotlights have a base design, which means that they will match your fittings as they exist. By over 95%, the running costs you are used to can decrease when using the 2 watts version and can give you up to 25 years service. Giving you bright, brilliant, crisp and clear light that is hard to beat, a high power version which is only 3 watts is available, bringing to offer the same benefits as the 2 watts version.

To conclude;

It is all clear that LED spotlights have so many advantages over the halogen fluorescents. Who would for instance not want to have a source of lighting giving more focused or accent lighting, and that is not energy-efficient? Off course, everyone will want to have lamps that will serve them for long, efficiently and saving costs. That is the reason LED spotlights are with time replacing halogens, and especially in commercial use.  Don’t be left out; conserve energy costs and get quality service from the lighting you choose.

See more this blog post: http://www.walleyesfortomorrowwalworth.org/upgrading-underwater-rov-lights-leds/

LED Boat Strip Lights Chip Considerations and Applications

LED boat strip lights offer increased safety and enhanced mood. They are capable of providing consistent illumination in areas with high activity. When installed outside of the vessel, the compact luminaries improve detection from nearby boats, greatly decreasing the chances of collision.

Purchasing LED boat strip lights for your vessel requires understanding its uses and configurations. Read on to learn about how these factors can affect illumination on your watercraft. To purchase waterproof strip lights, please visit – LarsonElectronics.com

LED Boat Strip Lights

LED Chip Size: 3528 and 5050

The first thing one must understand when choosing LED boat strip lights is chip size. These products are usually offered in 5050 or 3528 chip configurations. The values associated with the components refer to the size or dimensions of the chips in millimeters (mm). With this in mind, 5050 LEDs measure 5 mm x 5 mm, while 3528 LEDs measure 3.5 mm x 2.8 mm.

5050 LEDs are considered to be much stronger than 3528 LEDs. The luminaries house three diodes per single housing, resulting in brighter illumination. By comparison, 3528 LEDs only carry one diode per housing. Due to 5050 LED boat strip lights forcing more diodes on the board, heat can become an issue. Though when paired against outdated lighting technologies, LEDs run noticeably cooler.

Applications and Considerations

3528 LED boat lights are very useful for single color installations that require only one light color (for example, white). This is due to their single-diode configuration. To produce colors, LEDs need three diodes: red, green and blue (RGB). 5050 LED boat strip lights can accommodate this requirement, as they can hold multiple didoes. Other configurations and sizes include the following: 3020 LEDs, 3014 LEDs and 2835 LEDs. 2835 LEDs can be found inside airplanes and are the most compact from the set of examples. 3014 LEDs are typically installed in and around commercial buildings.

Going back to lighting systems for marine vessels and based on the information above, it would be possible to narrow down the exact type of LED boat strip light you need. Most boats use single-diode configurations for strip lighting to avoid mixing with navigation lights. Hence, it would make sense to use 3528 LEDs for exterior installations. However, to enhance the mood inside cabins on a boat, 5050 RGB LEDs may be used.

Lastly, LED strip lights for boats must be waterproof and corrosion resistant to prevent premature failure. Low voltage models that operate on 12V DC or 24V DC are useful for compliance with lighting regulations for marine applications.